Ultrasound Daily Digest     Sat, 13 Mar 93       Volume 2 : Issue  68 

Today's Topics:
					  [GUS] NAMES OF FUTURESES2 
		   GUS Midi connector with Joystick ports. (2 msgs)
						   Pats in Windows

	Information about the UltraSound Daily Digest (such as
mail addresses, request servers, ftp sites, etc., etc.) can be found
at the end of the Digest.

	*** HEY!!! *** 

	Before you ask a question, *** READ THE FAQ ***.  It's
available on the request server and the ftp sites, or check the
newsgroup archives.

----------------------------------------------------------------------

Date: Fri, 12 Mar 93 15:33:38 -0500
From: "It's your hand, Buckaroo" <dantonio@magick.tay2.dec.com>
Message-Id: <9303122033.AA23379@magick.tay2.dec.com>
Subject: [GUS] NAMES OF FUTURESES2 
To: Ultrasound Daily Digest <ultrasound@dsd.es.com>

Ok, this is the second time I've seen this list...Can you comment on the
apparent inconsistencies (to say the least) between this list and what
others have posted, including replies from the company's themselves??

> Sierra                   The Sierra Network       Mar-Apr
>     One of the fastest growing OnLine services.  Has plans to write
>     code for several Sierra titles.

They've said flat out that they aren't going to support the GUS...

> LucasArts Entertainment  Untitled                 Apr
>      Several titles planned for GUS support

Same here...Certainly X-Wing doesn't support the GUS...

DDA

------------------------------

Date: Fri, 12 Mar 1993 09:04:50 EST
From: Matthew E. Bernold <MEB117@psuvm.psu.edu>
Message-Id: <93071.090450MEB117@psuvm.psu.edu>
Subject: GUS Midi connector with Joystick ports.
To: Ultrasound Daily Digest <ultrasound@dsd.es.com>

I'd like to build a box for my GUS that has not only the MIDI in/out/thru,
but also has BOTH joystick ports.  Now, I know this is both possible, and
easy to do, but I don't have the pinouts for the GUS Joystick port or for
a standard joystick port so I can convert from one to the other.  I do have
the Midi part of the circuit, but not the joystick side.  Can anyone help
me out here?

When I finally get this puppy built, I'll draw up some instructions and a
part list, and post it to this group.

	   Matthew E. Bernold             MEB117@PSUVM.PSU.EDU
		 <<APOCALYPSE>>                  meb@haydn.psu.edu

------------------------------

Date: 12 Mar 1993 14:51:52 GMT
From: degood@lf.hp.com (John DeGood)
Message-Id: <1nq828$i0o@hpavla.lf.hp.com>
Subject: GUS Midi connector with Joystick ports.
To: Ultrasound Daily Digest <ultrasound@dsd.es.com>

Matthew E. Bernold (MEB117@psuvm.psu.edu) wrote:
: I'd like to build a box for my GUS that has not only the MIDI in/out/thru,
: but also has BOTH joystick ports.  Now, I know this is both possible, and
: easy to do, but I don't have the pinouts for the GUS Joystick port or for
: a standard joystick port so I can convert from one to the other.  I do have
: the Midi part of the circuit, but not the joystick side.  Can anyone help
: me out here?

I added one last weekend to my homemade MIDI box using the following pinout.

For joystick 1:

GUS DB-15   Joystick DB-15
---------   --------------
1       1
2       2
3       3
4       4
5       5
6       6
7       7
8       8

For joystick 2:

GUS DB-15   Joystick DB-15
---------   --------------
1       1
10      2
11      3
4       4
5       5
13      6
14      7
8       8

John DeGood  degood@lf.hp.com
Hewlett-Packard Little Falls Site (Wilmington, Delaware)

------------------------------

Date: Fri, 12 Mar 93 16:49:44 -0500
From: cs012043@cs.brown.edu (Brendan Miller)
Message-Id: <9303122149.AA15657@cslab0a.cs.brown.edu>
Subject: Pats in Windows
To: Ultrasound Daily Digest <ultrasound@dsd.es.com>

I've read the FAQ and there's no information on this in it. How do I change 
the PAT files that are associated with particular numbers (ie replace 
acpiano1 on 0 with oboe, for instance. I would like to be able to do this
without restarting or exiting Windows. I've tried altering ultrasnd.ini, 
changing the midimap configuration, and changing default.cfg and none of
those have worked. How can I do this? Thank you.

------------------------------

Date: 12 Mar 1993 15:00:01 -0600
From: Jason Neudorf <neudo417@hike.usask.ca>
Message-Id: <9303122100.AA04835@skdad.USask.ca>
To: Ultrasound Daily Digest <ultrasound@dsd.es.com>

Hi.  Just trying to start up the mailing list again.  (No messages, no
digest, no fun, eh?)

Have just received sbos 1.4b3, but not tried it yet.
(Where's version 2.02, Mr. Smith?  :) 

Let's get this list rolling again, OK?

------------------------------

End of Ultrasound Daily Digest V2 #68
******************************
